woodworking

Tablesaw/Router Workstation – Part 2c: Router Top

In this last part, I wanted to review the build of the router top. To start, I used the router base to trace a template in the top for the insert. Next, I cut the inside square. Next, I used a straight bit on the router along with clamped guide to cue down 1/4 inch shelf for the insert. Here, you can see insert sitting … Continue reading Tablesaw/Router Workstation – Part 2c: Router Top

therinardLeave a comment
woodworking

Tablesaw/Router Workstation – Part 2b: Side Supports

After the main body was complete, I began to build the side supports. These are really going to help cutting down long sheets and dimensions lumber on the table saw or routing with router. First, I build the side support bases and cut the 1/4 MDF about 1/8 inches larger around the edges. This was then glued and clamped for 30 minutes. After, the 1/8 … Continue reading Tablesaw/Router Workstation – Part 2b: Side Supports

therinardLeave a comment
Videos

Co-Worker Prank (Video in post)

We decided to play a prank on a fellow co-worker. We copied is diploma and other certificate on parchment paper that looked almost identical to the original. We then taped them to the outside of a difficult to open 8th floor window. Another co-worker brought high repelling gear and drew a diagram on the whiteboard for how to repel from the room to get them … Continue reading Co-Worker Prank (Video in post)

therinardLeave a comment